PERFORMANCE-BASED QUESTION

VLAN Switch Port Configuration

Scenario: A network technician replaced an access layer switch and needs to reconfigure it. The switch connects to devices in multiple departments. Configure each port with the correct VLAN assignment based on the topology below.
CompTIA Network+ Objective 2.3 Access / Trunk / LACP 8 Ports to Configure

Network Topology

VLAN 10 — Servers
VLAN 20 — HR
VLAN 30 — Sales
Trunk (Ports 7–8)
VLAN 1 — Default
Core Switch (Uplink)
Distribution Layer
TRUNK — 802.1Q / LACP
Access Switch — 8 Ports (Click a port to configure)

Port Configuration

No port selected Click a port in the switch diagram above to open its configuration panel.

Port 1

Fa0/1 Server Room
Instruction: Set the port status, mode, and VLAN assignment to match the correct configuration for this port's department. Press Save Port to apply your changes to the switch diagram.
Disabled
Disabled
Saved

Verification

Configure all 8 ports correctly and then submit your configuration for grading. All 8 ports must be correct to pass.

0/8
ports configured correctly
Configuration Verified — All 8 Ports Correct

You have successfully reconfigured the access switch. VLAN segmentation, trunk links, and LACP bonding are all operational.